Highball-1 Main Flight Computer Configuration

This flight computer uses Revision 3 of the Flight computer PCB, populated with AtMega324PA Microcontroller, clocked at 8MHz using the Internal Oscillator.

Working Now

  • Atmega324PA @ 8MHz
  • Quick-n-Dirty Linear Power Supply
  • Need to test Bluetooth with Cellphone
  • Secondary Telemetry Board
    • Temperature Sensor
    • 3 Axis Accelerometer
    • Humidity Sensor



  1. I2C communication between Sensor Board and Main Flight Computer
archive/highball1.txt · Last modified: 2018/07/29 17:58 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki